HSC Large Hack Colour Kit
16hh + Horse
Colors : Black, Dark Brown, Med Brown, Liver Chestnut, Dark Chestnut, Chestnut, Dark Bay,
The kit contains the following items: 7 x tubes + peroxide, Brush, 1 x 5 litre tub, 1 x gloves, 1 x Oilinone, 1 x HSC Soap
Instructions (before colour)
Before you begin you must read and conduct the following to ensure the product is used correctly and is suited for your horse or pony:
Please test prior to show or event to ensure product gives you the results you wish to achieve.
All skin sensitivity tests should be carried out by law. Skin tests should be carried out 48 hours prior to a colour. If possible, testing one week prior to event is recommended.
To test if the horse is sensitive to colour, simply apply a small amount of colour on the horses belly in between their two front legs. Leave on for 48 hours then rinse thoroughly. If the skin becomes irritated do not use the product.
Tips for successful application:
Give yourself time, you will require around 3 hours to complete the whole process properly. Approximately 1 hour to apply the colour and the rest of the time to process and wash off the colour. If possible do not apply the colour in sunlight as it may dry up quickly, apply indoors or under shelter outdoors then take out into sunlight to dry. Try to have a friend help you apply the colour, it takes half the time and you can check each others work to ensure no streaking occurs.
Try to enhance your horse or pony at least one week before the event, this gives you time to touch up and allows the colour to look very natural on competition day.
Follow the diagram on page 17 for application instructions. We prefer to start on the tougher skin areas as they require a little more time for the colour to process and penetrate.
Ensure horse is cooled at least 15 minutes without covers or sweating before applying colour.
HSC no ammonia colour is designed to enhance and/or darken coats, not change from one level to another.
Colour can stain clothing and accessories, please use caution when applying the colour. Please follow the instructions provided when colour enhancing: All kits are prepared for the horse or pony size indicated so that all you need to do is mix all the ingredients into the tub and apply. Try to leave a bit of mixture at the end of colouring your horse for touching up any areas that you may have missed.
White area application: Paint colour around horses or ponies white patches or socks working from the outside away. For extra protection, before you start colouring apply HSC Treatment or Conditioner to white patches or socks to act as a barrier. If in case some colour does accidentally penetrate use HSC Wipes or Stain Remover to remove colour.
Step 1: Ensure Coat is clear of any product residue or dirt as this can interfere with end colour result. A quick wash the night before or earlier before you apply the colour ensure the hair on the coat is ready for colour enhancing. The horse can be slightly moist before you apply the colour which can help spread the colour easier although it is recommended your horse be at least 80% dry.
Step 2: Place tecnica no ammonia colourª in the tub, place bottle of 10 vol peroxide in the tub, place Oilioneª in the tub and mix together until they form a smooth consistency.
Step 3: Use the paint brush to apply the colour on the coat, the paint brush will give you a line effect when you apply it, once you have applied the colour over the whole horse either use a damp sponge, short bristle brush or use your hands to rub the colour into the coat to remove the line effect caused by the paint brush. The purpose is to ensure that each hair is penetrated evenly and firmly with colour and you eliminate any chance of streaking*.
Step 4: Leave the colour on for approximately 45 minutes on the body and 1 hour on the mane & tail, then rinse off with Horse Show Colour Shampoo or Conditioner on body and mane & tail.
Step 5: Go over horse or pony when dry to look for areas that you may have missed. Fill in the streaks or missed areas with extra colour from the mixture or Ocolor
How to apply
Step 1: Start on the back then tail if required Points 1-2 on diagram.
Step 2: Colour across the body points 2, 3 & 4 on diagram and repeat 2, 3 & 4 on the other side. Note: Streaking usually occurs in this area; pay extra attention on this area. Step 3: Work your way up both sides of the neck area and include the mane if required point 5 on diagram.
Step 4: Colour the face Point 6 on diagram.
Step 5: Colour the legs Point 7, 8, 9 & 10 on diagram.
Minimum processing time 45 minutes on each step. Rinse off with HSC Shampoo from top to bottom.
We cannot guarantee results if you horse or pony is under medication.
If you have had a bit of streaking occur, simply use a bit of the remaining colour to touch up the streak. Leave on the colour for around 20 minutes and it should tone out the streak.
Use HSC Black shampoo or Ocolor to touch up colour between your next colour applications.
WARNING IRRITANT Keep out of reach of children.
DO NOT SWALLOW
AVOID CONTACT WITH EYES
FIRST AID For advice, contact a Poisons Information Centre: (AUS) Phone: 13 11 26 or contact a doctor (at once). If swallowed, do not induce vomiting. If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue Flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. or email firstname.lastname@example.org
Technical Helpline 0011 61 434 268 339